PXG Battle Ready II Torpedo Heel Shafted Putter

PXG Battle Ready II Torpedo Heel Shafted Putter is a premium mallet golf putter that combines a high moment of inertia (MOI), precision-milled construction and significant toe hang. It is designed for golfers who want to improve directional consistency, control putter face rotation and gain greater confidence on both short and long putts. The Heel Shafted hosel is particularly appealing to players who tend to over-rotate the putter face or pull their putts away from the intended target line.

The putter head is precision-milled from 303 stainless steel and features a thin-walled hollow construction filled with lightweight S COR™ polymer. This design allows mass to be redistributed towards the perimeter of the head, improving forgiveness while maintaining a pleasing feel at impact. The ultra-thin face with third-generation pyramid milling promotes consistent ball roll. Two adjustable sole weights also enable golfers to customise the head weight and balance according to their individual preferences.

Technologies and Performance Features

• Heel Shafted Hosel: the shaft axis is positioned far towards the heel of the putter head, creating Significant Toe Hang. This increases the force required to rotate the putter face during the stroke and, according to PXG, may benefit players who tend to over-rotate the putter or pull their putts away from the target line.


• High MOI Torpedo Mallet Design: the modern mallet head is engineered to deliver a high moment of inertia and excellent directional stability. Compared with the original Battle Ready range, PXG reports an MOI increase of up to 10% with the new construction, helping reduce unwanted head twisting on off-centre strikes.


• Precision-Milled 303 Stainless Steel: the putter body is precision-milled from 303-grade stainless steel. This construction allows accurate shaping, consistent face geometry and high-quality feedback when striking the golf ball.


• Hollow Body Construction: the thin-walled hollow body allows more mass to be positioned towards the perimeter of the head while moving the centre of gravity farther back. The result is higher MOI, improved stability and reduced sensitivity to strikes away from the ideal centre of the putter face.


• S COR™ Polymer Technology: PXG's proprietary lightweight polymer fills approximately 63% of the internal cavity. It supports the ultra-thin face, helps maintain structural integrity, dampens unwanted vibrations and delivers a soft yet solid impact sensation.


• Ultra-Thin Face Technology: the putter face measures just 0.055 inches thick, allowing mass to be distributed more efficiently and the centre of gravity to be positioned farther back. This supports a higher moment of inertia while providing responsive feedback when striking the ball.


• Third-Generation Pyramid Face Milling: the more aggressive third-generation pyramid pattern is designed to improve interaction with the dimples on a golf ball. It promotes consistent ball speeds and reliable roll across the face, combining a soft sound with the direct feedback of milled metal.


• Precision Weighting Technology: two adjustable sole weights allow golfers to fine-tune overall head weight and balance. Adding weight to the toe can slow face closure, while more weight in the heel can make it easier to square the face at impact. The standard head weight is 370 g, with an adjustment range from 355 to 390 g.


• Optional PXG M16 Shaft: according to the manufacturer, the optional PXG M16 shaft is 26% stiffer than a traditional steel putter shaft. It is designed to reduce unwanted face rotation at impact and may help improve accuracy, stability and the repeatability of the putting stroke.

Who We Recommend This Putter For

• Golfers who tend to over-rotate the putter face during their stroke and want better control over its position at impact.


• Players who tend to pull their putts away from the intended target line.


• Golfers with a naturally arcing putting stroke who find significant toe hang comfortable during a professional fitting.


• Players looking for a stable mallet putter with excellent forgiveness on off-centre strikes.


• Golfers who appreciate precision-milled metal putters with responsive feedback and a pleasing, muted impact sound.


• Players who want to customise putter length, grip, shaft and head weight through professional fitting to match their natural stroke.

Who We Would Not Recommend It to as a First Choice

• Golfers who strongly prefer traditional compact blade putters.


• Players who are most comfortable with Face Balanced weighting without pronounced toe hang and a putting stroke with minimal arc.


• Golfers who tend to push their putts away from the target line and may benefit more from a different hosel configuration.


• Players who prefer a very firm metallic impact sensation without vibration damping from polymer filling.


• Golfers who expect high MOI or significant toe hang alone to automatically eliminate mistakes in green reading and distance control.

Key Advantages

• Heel Shafted hosel with significant toe hang for improved control over putter face rotation.


• High MOI and excellent directional stability from the mallet head design.


• Precision-milled body made from high-quality 303 stainless steel.


• Thin-walled hollow construction with S COR™ polymer technology for vibration damping.


• Ultra-thin putter face measuring just 0.055 inches thick.


• Third-generation pyramid face milling to promote consistent ball speed and roll.


• Ability to fine-tune impact feel and face response using adjustable weights.


• Two adjustable weights with a head weight adjustment range from 355 to 390 g.

Potential Drawbacks to Consider

• Significant toe hang may not suit players accustomed to Face Balanced putters.


• The distinctive balance of the Heel Shafted hosel may require an adjustment period and a different feel during the stroke.


• The mallet head shape may not appeal to golfers who prefer a compact blade putter.


• Premium milled construction and advanced technologies are reflected in a higher purchase price.


• Achieving optimal face rotation and head weight may require professional fitting and selecting a suitable combination of weights.

Our Recommendation

At DigitalGolf, we recommend the PXG Battle Ready II Torpedo Heel Shafted primarily to golfers who need better control over excessive putter face rotation or have a tendency to pull their putts away from the intended target line. We consider its combination of significant toe hang, high MOI and a precision-milled 303 stainless steel body to be its greatest strength. The hollow construction with S COR™ technology and ultra-thin face provides stability even on less accurate strikes while retaining the responsive feedback golfers need to control putting tempo and distance.

Before purchasing, we recommend testing the distinctive Heel Shafted balance and undergoing a professional fitting. Significant toe hang may suit players with arcing putting strokes, but stroke path alone should not determine hosel selection. It is important to check shaft length, grip type, lie angle and the standard 370 g head weight. The two adjustable weights also allow players to fine-tune impact feel, tempo and face behaviour according to their individual technique.

Technical Specifications

• Brand: PXG


• Product Series: Battle Ready II


• Model: Torpedo


• Club Type: golf putter


• Head Type: mallet, high MOI


• Hosel: Heel Shafted


• Head Balance: Significant Toe Hang


• Head Material: 303 stainless steel


• Head Construction: precision-milled thin-walled hollow body


• Core Technology: lightweight S COR™ polymer


• Polymer Fill Volume: approximately 63% of the internal cavity


• Face: Third-Generation Pyramid Face Milling


• Face Thickness: 0.055 inches


• MOI: up to 10% higher than the original Battle Ready range, according to PXG


• Standard Head Weight: 370 g


• Head Weight Adjustment Range: 355–390 g


• Number of Adjustable Weights: 2 on the sole of the head


• Loft: 3°


• Lie: 70°


• Shaft Options: standard configuration, optional PXG M16 – subject to availability


• Additional Technologies: Precision Weighting Technology, Hollow Body Construction

The PXG Battle Ready II Torpedo Heel Shafted is a technologically advanced mallet putter for golfers who demand excellent stability, a refined impact feel and better control over putter face rotation. Its precision-milled 303 stainless steel construction, S COR™ technology, adjustable weights and significant toe hang help promote a more repeatable putting stroke and greater confidence on the greens.